19 List of tables
1. Functions.....................................................................................................................16
2. Status indicators.........................................................................................................18
3. Interoperability with safety laser scanners............................................................... 22
4. Interoperability with safety laser scanners in compatibility mode.......................... 22
5. Advantages and disadvantages of the mounting options........................................40
6. Schematic legend for connection diagrams............................................................. 51
7. Pin assignment on the system plug.......................................................................... 67
8. Use of the supplied cable glands.............................................................................. 71
9. Recommended wire cross-sections.......................................................................... 71
10. Pin assignment on pre-assembled system plugs.....................................................71
11. Pin assignment on the M8 × 4 configuration connection....................................... 72
12. Functions in the compatibility mode......................................................................... 75
13. Required compatibility mode with different firmware versions of the S300 in an
E
FI system with other S300....................................................................................... 76
14. Required compatibility mode with different firmware versions of the S300 in an
EFI system with other safety laser scanners............................................................ 76
15. Comparison of mobile and stationary applications..................................................78
16. Maximum protective field ranges at different resolutions.......................................78
17. Empirical values for the required input delay........................................................... 83
18. Level at the connections for the control inputs for complementary sampling....... 83
19. Truth table for 1-of-n sampling with two input pairs.................................................83
20. Behavior of the device on a contactor malfunction..................................................85
21. Configuration options of the universal I/O connections as outputs....................... 88
22. Number of field sets that can be configured per variant.........................................89
23. Number of monitoring cases......................................................................................94
24. Truth table for complementary sampling.................................................................. 95
25. Truth table for 1-of-n sampling...................................................................................96
26. Recommended multiple sampling.......................................................................... 100
27. 7segment display during and after the power up sequence during initial commis‐
sioning.......................................................................................................................103
28. Display of LEDs after the power up sequence........................................................103
29. 7segment display during and after the power up sequence during recommission‐
ing..............................................................................................................................105
30. Display of LEDs after the power up sequence........................................................105
31. Error and status indications of the LEDs................................................................ 113
32. Error and status indications of the LEDs in the compatibility mode.....................114
33. Error and status indications on the 7segment display.......................................... 114
34. General details......................................................................................................... 121
35. Functional information.............................................................................................122
36. Electric...................................................................................................................... 123
37. Supplements for multiple sampling........................................................................ 130
38. Status information (data from the safety laser scanner).......................................132
39. Control features (data to the safety laser scanner)............................................... 133
40. Part numbers, systems............................................................................................136
41. Part numbers, system plugs....................................................................................137
42. Ordering information, service cables...................................................................... 138
43. Connecting cable ordering information.................................................................. 138
44. Ordering information, mounting kits....................................................................... 138
45. Ordering information safety relays/compact safety controller..............................140
46. Safety controller ordering information.................................................................... 140
47. Ordering information, network solutions................................................................ 141
48. Ordering information, miscellaneous......................................................................141
49. Note on specified standards....................................................................................147
LIST OF TABLES 19
8010948/ZA21/2020-06-18 | SICK O P E R A T I N G I N S T R U C T I O N S | S300
151
Subject to change without notice
To Next Page
Loading...
Need help?
General
