SICK S300 Series User Manual

S3000 Standard S3000 Advanced S3000 Professional S3000 Professional CMS S3000 Remote S3000 Expert S300 Standard
1)
S300 Advanced S300 Professional S300 Professional CMS S300 Expert S300 Expert CMS S300 Mini Standard
1)
S300 Mini Remote
S300 Expert
l l l l l l
–
l l l l l
– –
1)
This device does not have an EFI interface so it cannot be used in an EFI system.
l = E
FI system supported
– = EFI system not supported
Further topics
•
"C
ompatibility mode", page 74
3.2.8.2 Special considerations for EFI systems
Input signals
In an E
FI system, the input signals for monitoring case switching are applied to the
inputs of the host or a safety controller. The guest communicates with the host via EFI
and receives the input information regarding monitoring case switching from the host.
Monitoring case switching
In an EFI system, the host determines the number of possible monitoring cases. If you
have configured an S300 with a higher-level device (S3000 or higher specification
S300 or sens:Control device) as the guest, more monitoring cases may be available
depending on the system configuration.
Example
You are using an S300 Advanced as a guest for an S300 Professional. The S300 Pro‐
fessional has been configured with 8 monitoring cases. In this case 8 monitoring cases
will also be available on the S300 Advanced.
Internal or external OSSDs
In an EFI system, you define which output signal switching device (OSSD) is switched
when there is an object in the protective field.
Restart interlock/delay
The effectiveness of a restart interlock/delay configured in the S300 depends on the
integration of the EFI status information from the S300 in the logic of the Flexi Soft
safety controller.
Further topics
•
"OSSDs", page 84
•
"Restart", page 85
3.2.8.3 Interoperability with sens:Control devices
The safety laser scanner can be connected to the following sens:Control devices and
t
hereby integrated into the respective bus system.
PRODUCT DESCRIPTION 3
8010948/ZA21/2020-06-18 | SICK O P E R A T I N G I N S T R U C T I O N S | S300
23
Subject to change without notice

SICK S300 Series Specifications

General

Scanning angle	270 °
Number of monitoring cases	4
Protection class	IP65
Number of scanning planes	1
Angular resolution	0.5°
Interface	RS-422, Ethernet
Supply voltage	24 V DC
Ambient operating temperature	0 °C ... +50 °C
Laser class	1 (IEC 60825-1)
Storage temperature	–25 °C ... +70 °C
Protective field range	0.1 m to 3 m