SICK S300 Series User Manual

NOTE
W
hen mounting the device, observe the dimensional drawings.
Further topics
•
"Dimensional dr
awings", page 135
5.2.4 Information label Notes on daily check
b
Af
ter mounting the device, affix the supplied Notes on daily check information
label.
NOTE
•
Use onl
y the information label in the language that the operators of the
machine can read and understand.
•
Affix the information label so that it is clearly visible to all operators during
operation of the system. After attaching additional objects and equipment,
the information label must not be concealed from view.
MOUNTING 5
8010948/ZA21/2020-06-18 | SICK O P E R A T I N G I N S T R U C T I O N S | S300
63
Subject to change without notice

SICK S300 Series Specifications

General

Scanning angle	270 °
Number of monitoring cases	4
Protection class	IP65
Number of scanning planes	1
Angular resolution	0.5°
Interface	RS-422, Ethernet
Supply voltage	24 V DC
Ambient operating temperature	0 °C ... +50 °C
Laser class	1 (IEC 60825-1)
Storage temperature	–25 °C ... +70 °C
Protective field range	0.1 m to 3 m