Communication
9.3 Communication via PROFIBUS DP
Function Manual
608 Function Manual, 01/2011, 6SL3097-4AB10-0BP3
4. The "Insert slot" button is used to create a new setpoint slot for the first drive object
behind the existing setpoint slot.
Figure 9-29 Insert new slot
5. Assign the setpoint slot the type "slave-to-slave communication".
6. In the column, select the PROFIBUS DP address of the publisher.
This displays all PROFIBUS DP slaves from which actual value data can be requested. It
also provides the possibility of sharing data via slave-to-slave communication within the
same drive device.
To Next Page
Loading...
