NCK start-up
10.3 Memory configuration
CNC Part 1 (NCK, PLC, drive)
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0
117
Legend Description User
2 In addition to part programs and OEM cycles, can be set via
MD 18353: $MM_M_FILE_MEM_SIZE.
User
3 SIEMENS cycles Siemens AG
4 Reserved Siemens AG
5 RAM in NCK User
6 RAM in NCK, contains the system and user data accessed by the
NCK during program execution.
Numbers for tools, frames, etc., are set by default.
User
7 Additional memory (optional) Available to users as an option and
can be used for RAM in NCK or for
part programs and cycles.
Memory display
The memory available in the NCK is displayed on the user interface, e.g., HMI Advanced,
under: Commissioning > NC > NC memory.
See also
Import licensing terms (Page 227)
To Next Page
Loading...
