Licensing
14.8 Assigning via Web License Manager
CNC Part 1 (NCK, PLC, drive)
236 Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0
Note
Ensure that the hardware serial number displayed is also really the one you want to make
the assignment for. The assignment of a license to a piece of hardware cannot be
reversed via the Web License Manager.
2. Go to the Internet page of the Web License Manager:
http://www.siemens.com/automation/license
3. Login via "Customer login":
– User name
– Password
4. Follow the additional instructions in the Web License Manager.
Note
License Key via e-mail
If you have an e-mail address, you have the option (checkbox) of receiving the License
Key by e-mail. Advantage: the entry of the License Key to the control system is simplified.
5. After completing the assignment process, enter the License Key displayed on the Web
License Manager into the licensing dialog of the HMI user interface.
HMI Advanced/HMI Embedded:
Operating-area switchover: Commissioning > Key: etc. (">") > Licenses > Overview
6. Confirm the entry of the new License Key by pressing the softkey: "Transfer".
To Next Page
Loading...
