4
Machine operating area 01/2008
4.2 General functions and displays
4
© Siemens AG 2008 All rights reserved.
4-102 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Window division
5 lines are displayed:
1. Line: Standard M functions:
M03/M04/M05/M19, M7/M8, M40/M41/M42/M43/M44/M45
2. Line: customized, grouped together M functions
3. Line: customized, grouped together M functions
4. Line: non-grouped M functions
5. Line: H functions
The lines are oriented toward the actual value positions.
maximum of 5 M functions or 5 H functions can be displayed in each
line.
Example:
To Next Page
Loading...
