Siemens SINUMERIK 840Di sl - Protocol: Program Loading List

4
Machine operating area 01/2008
4.6 Automatic mode
4
© Siemens AG 2008 All rights reserved.
4-136 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Additional information
Workpieces/part programs that have been loaded into the NC memory
are marked with ("X") in the "Loaded" column in the
workpiece/program overview.
4.6.4 Protocol: Program loading list
Function
Error list:
Display of previously loaded programs if errors have occurred during
loading.
Sequence of operations
The "Machine" operating area is selected.
Program
overview
The "Program overview" opens.
The softkey bars change.
Log
Press the "Log" softkey.
The "Job log for program overview" window is opened.