Siemens SINUMERIK 840Di sl - Reading-Out Data

7
01/2008 Services operating area
7.1 Services main screen
7
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 7-363
Sequence of operations
Data in
The "Programs/Data" file tree is displayed.
The vertical softkey bar changes.
Mark the file into which you wish to read the archive.
Select the source area (see title in window):
Floppy disk
• Diskette drive: Shows the contents of the diskette. Select the
archive you wish to import.
Archives
• Opens the "Archives" directory on the hard disk. Select the archive
you wish to import.
NC card
• The contents of the archives directory on the NC card are
displayed. Select the archive you wish to import.
7.1.2 Reading-out data
Function
Create archives:
With the "Data out" function, the source area (see title in window) for
data transmission is the displayed directory tree.
Possible target areas are:
• The "Archives" directory on the hard disk
• USB memory module
• A diskette drive
• Free memory areas on the NC card.
Sequence of operations
Data from
The "Programs/Data" file tree is displayed.
The vertical softkey bar changes.
You have marked the data that you wish to save/archive.
Select the target area (see title in window):
Floppy disk
• Diskette drive: The diskette contents are displayed.
Enter the name of the new archive file.