6
01/2008 "Program" operating area
6.9 Managing programs
6
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 6-339
Please note that on the directories:
comments \COM.DIR and definitions \DEF.DIR can only be
accessed in the Services operating area via "Manage data".
6.9.1 New workpiece/part program
Function
The following subsection describes how you can select workpieces
and part programs in a directory. A selected file can then be called
and edited in the text editor.
Sequence of operations
Select workpiece/part program:
Work-
pieces
• Workpieces
Part
programs
• Part programs
Sub-
programs
• Subprograms
User
cycles
• User cycles
Clipboard
• Clipboard
Position the cursor in the directory on the desired file. For each file,
the file name, file type, length, date of creation/last change are
displayed.
You can change the properties of the file display (see Section
"Commissioning", "Settings" menu)
Call a part program:
Use the cursor to select a program in the program overview and press
the "Input" key.
The text editor is displayed with the file you have selected.
You can now edit the part program.
To Next Page
Loading...
