Siemens SINUMERIK 840Di sl - Starting Angle for Thread Cutting

5
Parameters operating area 01/2008
5.5 Setting data
5
© Siemens AG 2008 All rights reserved.
5-226 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
5.5.5 Starting angle for thread cutting
Function
For thread cutting, a starting position for the master spindle is
displayed as the starting angle. A multiple thread can be cut by
changing the angle when the thread cutting operation is repeated.
Sequence of operations
Setting
data
Press the "Setting data" softkey.
The vertical softkey bar changes.
Starting
angle
Edit starting angle:
Press the "Starting angle" softkey.
The "Starting angle for thread" window opens.
Enter a new value.