6
"Program" operating area 01/2008
6.8 Program simulation
6
© Siemens AG 2008 All rights reserved.
6-332 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
6.8.4 Display and colors
General attributes
Settings.
Display and
colors...
Setting the general properties of the simulation graphics:
Rapid traverse dashed line
Alternatively, rapid traverse as a full line, as used for feedrate
Scale at edge of window
Alternatively, as scale on the coordinate axes
Path labels
Offers various possibilities under "Manage path labels" for displaying
program labels, which have been inserted freely to identify specific
points in the NC program (observe label syntax), as path labels at
the corresponding point in the simulation graphics and then storing the
associated graphic model in the buffer.
Program labels can also be used to mark program sections, which can
then be included by the central timing facility (see .. \ Downtime
settings \ Timing mode \ In sections with labels).
Path labels are specified in "Channel/spindle" as delimiter for section-
by-section simulation in the same or different channels.
You can save section models and use a search run to start again at
that point without needing to repeat the preceding sections.
Use of color palettes
- Select a color with the cursor keys and press the Select key. The
color of the focus frame changes.
- Use the cursor keys to select the object and press the Select key
again. The object displays the selected color..
General colors
In addition to the standard VGA colors, the color elements black and
transparent to hide graphic elements are available in the color palette.
Color selection option for background, blank, axis intersection, tool
holder and tool edge.
To Next Page
Loading...
