Siemens SINUMERIK 840Di sl - Reading-In Data

7
Services operating area 01/2008
7.1 Services main screen
7
© Siemens AG 2008 All rights reserved.
7-362 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Vertical softkeys
The vertical softkeys allow you to select the source area (for data
import) or the target area (for data export). The yellow title in the
window indicates the area.
Floppy disk
• Floppy disk
Archives
• "Archives" directory on hard disk
NC card
• "Archives" directory on the NC card
Note:
Users with access authorization to level 3 and higher can access this
softkey. It is displayed only if archive _N_ORIGINAL_ARC is stored on
the NC card.
7.1.1 Reading-in data
Function
When reading in archives and files,
the following are possible source areas:
• Archive (i.e. the "Archives" directory) in the directory tree (even if
it is not displayed under "Data selection").
• USB memory module
• A diskette drive
• The NC card, if formatted on a Flash File System.
When archives are read in, their format is recognized automatically.
Data with longer file names (> 8 + 3 characters) can be read in from
diskette.