Siemens SINUMERIK 840Di sl - 5.5.4 Dry run feedrate for dry run operation DRY

5
01/2008 Parameters operating area
5.5 Setting data
5
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 5-225
5.5.4 Dry run feedrate for dry run operation DRY
Function
The feedrate entered here is used in the active program instead of the
programmed feedrate when the function "Dry run feedrate" (program
control) is selected in "Automatic" mode.
Sequence of operations
Setting
data
Press the "Setting data" softkey.
The vertical softkey bar changes.
Feedrate
DRY
Press the "Feedrate DRY" softkey.
The "Dry run feedrate" window is opened.
Edit the dry run feedrate:
Enter a new value.