Siemens SINUMERIK 840Di sl - Program operating area

6
01/2008 "Program" operating area
6
©Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 6-251
"Program" operating area
6.1 Program types......................................................................................................... 6-253
6.1.1 Part program ........................................................................................................... 6-253
6.1.2 Subprogram ............................................................................................................ 6-253
6.1.3 Workpiece ............................................................................................................... 6-253
6.1.4 Cycles ..................................................................................................................... 6-253
6.1.5 Storing programs .................................................................................................... 6-253
6.1.6 Templates ............................................................................................................... 6-254
6.2 Main screen program .............................................................................................. 6-256
6.3 Edit programs iin the standard ASCII Editor .......................................................... 6-258
6.3.1 Undo and redo in the standard ASCII editor........................................................... 6-260
6.3.2 Additional optional editors....................................................................................... 6-261
6.3.3 Selective program protection *RO*......................................................................... 6-261
6.4 Structured step sequence display (option) ............................................................. 6-263
6.5 Multi-channel step sequence programming (option)............................................... 6-267
6.5.1 Multi-channel workpiece program views................................................................. 6-270
6.5.2 Activating timing...................................................................................................... 6-276
6.5.3 Activating simulation ............................................................................................... 6-277
6.6 Multiple editor (option) ............................................................................................ 6-281
6.6.1 Operator/display functions in the ASCII full views .................................................. 6-281
6.6.2 Alignment of the channels/MPFs to be displayed................................................... 6-285
6.7 Free contour programming ..................................................................................... 6-287
6.7.1 Programming a contour .......................................................................................... 6-288
6.7.2 Undercuts for turning technology............................................................................ 6-293
6.7.3 Parameterizing contour elements ........................................................................... 6-296
6.7.4 Graphically displaying the contour.......................................................................... 6-298
6.7.5 Symmetrical contours with milling technology ........................................................ 6-299
6.7.6 Specifying contour elements in polar coordinates, closing the contour.................. 6-302
6.7.7 Support for contour programming........................................................................... 6-307
6.7.8 Parameter description of the contour elements straight line/circle ......................... 6-308
6.7.9 Programming examples for freely programming a contour .................................... 6-309
6.7.10 Cycle support .......................................................................................................... 6-313
6.8 Program simulation ................................................................................................. 6-314
6.8.1 Using the simulation function.................................................................................. 6-316
6.8.2 Simulation settings.................................................................................................. 6-325
6.8.3 Setting downtimes................................................................................................... 6-331
6.8.4 Display and colors................................................................................................... 6-332
6.8.5 Section-by-section simulation ................................................................................. 6-333
6.8.6 Quick display in the simulation for mold making..................................................... 6-334
6.8.7 Simulation with external network drive ................................................................... 6-336
6.8.8 Simulation for orientable toolholder ........................................................................ 6-337
6.9 Managing programs ................................................................................................ 6-337