Siemens SINUMERIK 840Di sl - 8.6.4 File functions

8
Diagnostics operating area 01/2008
8.6 Interrogating the PLC status
8
© Siemens AG 2008 All rights reserved.
8-428 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
8.6.4 File functions
File functions
You can use the file functions to manage operand screens.
Sequence of operations
Diagnostics
The "Diagnostics" operating area is selected.
PLC status
Press the "PLC status" softkey.
The first operand screen form appears.
The vertical softkey bar changes.
File
functions
Press the "File functions" softkey.
The "File functions" window opens.
Enter the file name of the desired operand screen form or
position the cursor on the desired operand screen form in the list.
Delete
The selected operand screen form is deleted.
Save
The current contents of the PLC status are saved in the selected
operand screen form.
Load
The contents of the selected operand screen form are loaded to the
PLC status.
Additional information
The operand screen forms are ASCII files.
■