Siemens SINUMERIK 840Di sl - 9.1 Startup main screen

9
Commissioning operating area 01/2008
9.1 Startup main screen
9
© Siemens AG 2008 All rights reserved.
9-430 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
9.1 Startup main screen
Danger
Changes in the Commissioning operating area have a significant
influence on the machine. Incorrect configuration of the parameters
can endanger human life and cause damage to the machine.
Access to certain menus in the "Commissioning" operating area can
be protected by keylock switch or password.
This Chapter describes functions which the machine operator can
perform on the basis of his or her access rights.
References Further information regarding startup (commissioning) is provided in
Commissioning Manual, HMI-Advanced (IM4).
Target groups include:
• System personnel
• Machine manufacturer
• Service personnel
• Machine users (machine setters)
Function
The diagram shows the status
of the SINUMERIK
solutionline:
The "Machine configuration" window is displayed in the
"Commissioning" main screen.