5
Parameters operating area 01/2008
5.2 Tool offset
5
©Siemens AG 2008 All rights reserved.
5-178 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
5.2.4 Deleting a tool
Function
The tool is deleted together with all its cutting edges and the tool list
updated accordingly.
Sequence of operations
Tool
offset
The "Tool offset data" window is displayed automatically.
T-No +/-
D-No +/-
Scroll the screen contents until you reach the tool to be deleted.
Delete
The vertical softkey bar changes when the "Delete" softkey is
selected.
Delete
Tool
Press the "Delete tool" softkey.
The tool and all its edges are deleted. The tool offsets of the tool
number preceding the deleted tool are displayed.
To Next Page
Loading...
