2
01/2008 Operator Components/Operating Sequences
2.3 SINUMERIK HT 8
2
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 2-39
2.3 SINUMERIK HT 8
The mobile SINUMERIK HT 8 handheld terminal combines the
functions of an operating panel and a machine control panel. It is
therefore ideal for visualization, operation, teach-in, and programming
at the machine:
- Manipulators/robots
- Machine tools
- Production machines
The 7.5 TFT color display provides touch operation. It also has
membrane key for traversing the axes, for numeric input, for cursor
control, and for machine control panel functions like start and stop.
Prerequisite
To operate the HT 8, you must have the operator privilege.
Keyboard operation
See section “Machine control panel” for a description of the individual
keys.
Machine manufacturer
The four customer keys are freely assignable and can be set up
customer-specifically by the machine manufacturer.
This <STANDBY> key presently has no function.
To Next Page
Loading...
