Siemens SINUMERIK 840Di sl - 7.5 V.24 interface

7
Services operating area 01/2008
7.5 V.24 interface
7
© Siemens AG 2008 All rights reserved.
7-382 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
7.5 V.24 interface
7.5.1 Parameterizing the V.24 interface
Function
Parameters for
DIN programs
Default: V.24 user
Interface: COM1
Protocol: RTS/CTS
Parity: None
Stop bits: 1  With header and trailer labels
Data bits: 8 ; Stop with end of data transfer character
Baud rate: 9600
Archive format: Punched tape with ... time monitoring (sec.): 04
With this setting, programs according to DIN are downloaded (starting
with %) or output.
Parameters for archiving
with PG/PC
Default: V.24 PG/PC
Interface: COM2
Protocol: RTS/CTS
Parity:
Stop bits: 1
Data bits: 8
Baud rate: ≥ 9600
Archive format: Binary format (PC format)