8
Diagnostics operating area 01/2008
8.4 Service displays
8
© Siemens AG 2008 All rights reserved.
8-412 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
8.4.4 Systemressourcen anzeigen
Function
For the NC areas you can display the system resources (utilization
display) currently being used:
Net and gross runtimes of
• position controller,
• interpolator and
• preprocessing.
Sequence of operations
Diagnostics
The "Diagnostics" operating area is selected.
Service
displays
System-
resources
Press the "Service displays" softkey then "System resources".
The "NC utilization" screen is displayed.
The following minimum/maximum total data for the servo, IPO cycle
and preprocessing are displayed:
• Net runtime in ms
• Gross runtime in ms
• Level of the IPO buffer in percent
• Total capacity utilization in percent
Stop
Start
The display update can be halted with the "Stop" softkey, the
displayed values are updated again with the "Start" softkey.
To Next Page
Loading...
