Siemens SINUMERIK 840Di sl - Page 361

7
01/2008 Services operating area
7.1 Services main screen
7
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 7-361
Horizontal softkeys
Data in
Read in archives/files:
• Archive from (directory "Archive" on the hard disk)
• USB local
• Diskette (if available)
Data from
Read out archives/files
• Archive to (directory "Archive" on the hard disk)
• USB local
• Diskette (if available)
Manage
data
Files/directories can be created, loaded, saved, deleted or copied and
their attributes can be displayed/changed.
Log
This softkey can only be selected if a log is available, i.e., after a
transmission request has been initiated, a log is generated and the
softkey becomes active.
Current actions, errors and any prompts are displayed in the job list.
Prompts must be acknowledged.
The "Job log" lists, for example, errors that have occurred in data
transmission.
Data
selection
By using the "Data selection" softkey, you can choose the directories
that you wish to have displayed in the "Services" main screen.
Series
comm.
Expanded softkey bar:
You can archive data for a series commissioning. The softkey is
password-protected.
To update the SINUMERIK solution line , select "NC" as the archive
content during the series commissioning.
Upgrade
The update function is only available on the SINUMERIK powerline.
This function supports updating of the NC system software. For this
purpose, you can create an update archive.