Siemens SINUMERIK 840Di sl User Manual

4
Machine operating area 01/2008
4.2 General functions and displays
4
© Siemens AG 2008 All rights reserved.
4-106 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
• "Status" column:
• " " (no information given)
the condition is checked in the interpolation cycle.
• "disabled"
LOCK was set from the PLC for the synchronized action
• "active"
The action is currently being executed. If the instruction
part of a programmed synchronized action starts a
subprogram/cycle, the current block number of the cycle is
additionally displayed in the "Block number SPF" column.
Search in
program
A window opens:
Here you must enter the system variable/synchronized action of your
choice.
The control searches the current or an additionally specified program
for synchronized actions which match the current block and
synchronized action numbers.
If the control finds matching program blocks, the associated condition
and instruction parts are also shown on the main screen along with
the other data.
Press RECALL to return to the "Automatic" main screen.

Siemens SINUMERIK 840Di sl Specifications

General

Brand	Siemens
Model	SINUMERIK 840Di sl
Category	Control Unit
Language	English