4
01/2008 Machine operating area
4.4 JOG mode
4
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 4-123
Example 1:
Y
X
Approach
direction
Set "+R" with toggle key.
The figure below shows how system frame $P_SETFR is displayed as
the line "Set work offset".
Toolholder
If a toolholder is active in the present system, it is displayed in the G
function window as "TCARR=n" (n = 1 or 2).
To Next Page
Loading...
