Siemens SINUMERIK 840Di sl User Manual

6
01/2008 "Program" operating area
6.3 Edit programs iin the standard ASCII Editor
6
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 6-259
Dual ASCII editor
Find/
Go to...
View
subprogr.
If you are positioned on a subprogram call in the ASCII editor, this
program is loaded to the second editor when you press the "View
subprogram" softkey.
This function is only
available in the ASCII editor.
Synchronized view in the dual ASCII editor
Find/
Go to...
Synchron.
WAIT
You can view instruction groups in the ASCII editor. Position the
cursor on a WAIT marker instruction in one of the two ASCII editors.
Press the "Synchron. WAIT markers" softkey. This string is sought in
the second editor and displayed at the same height in the window as
the cursor in the first editor. The focus remains in the first editor.
If no WAIT marker instruction is found together with its brackets, the
next WAIT marker instruction is displayed in the adjacent window
regardless of the brackets.

Siemens SINUMERIK 840Di sl Specifications

General

Brand	Siemens
Model	SINUMERIK 840Di sl
Category	Control Unit
Language	English