6
"Program" operating area 01/2008
6.4 Structured step sequence display (option)
6
© Siemens AG 2008 All rights reserved.
6-264 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
This ensures that an existing program can be displayed in steps
without intervention.
If you wish to store your own icons or use existing ones, please
contact your machine supplier.
Switch view
or
You can toggle between two views in step sequence display: The
secondary level is either shown (+ Expanded) or hidden (− Collapsed).
You can toggle between both views using these buttons.
Example "Collapsed" view
Example “Expanded” view
To Next Page
Loading...
