6
"Program" operating area 01/2008
6.9 Managing programs
6
© Siemens AG 2008 All rights reserved.
6-350 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Query dialogs
"Save as"
In the "Commissioning" operating area, press the “HMI” → “System
settings” → “Query” softkeys to specify that a query dialog box is to
appear before files are overwritten. Otherwise, the files are overwritten
without prompting or a copy is created.
Vertical softkeys for "Save as"
All without
prompt
Press the "All without prompt" softkey if all existing files in the current
directory are to be created with new names without a "Save as"
dialog. All files for which the original file type cannot be created are
automatically converted to the specified data type.
Skip file
Press the "Skip file" softkey if the copy operation is to be continued
with the next file.
Abort
This key cancels the entire copy operation.
OK
An existing file is either overwritten or, if the name or file type was
changed, saved with the new name. The "OK" softkey is disabled if
you have to enter a new name. The "Data type" input field accepts 0
to 3 letters.
Query dialogs
Copy file from hard disk:
• The file exists on hard disk and is overwritten when you select
"OK" if the name/data type is to remain unchanged!
• The file exists on hard disk. When you select "OK" a copy is
created if the name/file type is to remain unchanged!
Copy file from NC memory:
• The file exists on the NCK and is overwritten when you select "OK"
if the name/data type is to remain unchanged!
• The file exists on the NCK. When you select "OK" a copy is
created if the name/file type is to remain unchanged!
Copy a workpiece:
• The workpiece already exists. When you select "OK" a copy of the
workpiece is created if a new name is not specified!
Copy a directory:
• The directory already exists. When you select "OK" the contents
are overwritten if a new name is not specified!
• The directory already exists. When you select "OK" the contents
are overwritten if the directory with a fixed data type cannot be
changed.
Copy a file of data type main program (MPF):
• The file cannot be created at this location under its original "main
program" data type!
To Next Page
Loading...
