Siemens SINUMERIK 840Di sl - Page 356

6
"Program" operating area 01/2008
6.10 Accessing an external network drive/computer
6
© Siemens AG 2008 All rights reserved.
6-356 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Additional information
• If the drive/computer is not connected or enabled, the message
"No data available" is displayed.
• A root directory can only be selected as the destination for copying
to a network drive if "." is displayed.
• In the Machine operating area, only files with an HMI-compatible
name can be selected for "Exec. f. hard disk" (i.e. up to 27
characters, no special characters, no blanks).
• In operating area Program, the functions Copy, Insert, and Delete
can only be applied to files without blanks in their name.
• The file name is displayed as it would be in the Windows Explorer
with a long file name, but only up to 25 characters are displayed.