Siemens SINUMERIK 840Di sl - Page 365

7
01/2008 Services operating area
7.1 Services main screen
7
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 7-365
Log
The "Log" window is opened. The source or target of the job is
displayed in the header.
The vertical softkey bar changes.
Jobs are assigned to the vertical softkeys, i.e. jobs for
Manage
data
• "Manage data"
Floppy disk
• Floppy disk drive
You can switch between windows with these softkeys.
The softkey label displays "...Stop" if a job is not running. You can
abort a job in progress by pressing the "Stop" softkey again.
A message line is displayed in the "Error list" field to indicate whether
or not errors have occurred during data transmission.
In the case of queries, the prompt "Please acknowledge query in log
window" appears in the user response line.
Confirm the prompt with one of the vertical softkeys:
No
• Do not confirm
Yes, all
• Confirm all
Yes
• Confirm
Name/type
• Change name/type
Stop
• Abort complete job
Delete log
The currently displayed log is deleted.
The log window is closed when the last log is deleted.