Siemens SINUMERIK 840Di sl - Page 375

7
01/2008 Services operating area
7.3 Data selection
7
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 7-375
Sequence of operations
Services
The "Services" operating area is selected.
Data
selection
Press the "Data selection" softkey.
The "Data selection for display" window is opened.
The vertical softkey bar changes.
You can page through the window using the "Page" keys.
Users
You can toggle between the settings
• Users
Mainten-
ance
• Maintenance
Default
values
• Default values
</ph> The "Default values" softkey assigns default values to the
settings "User" or "Maintenance". These are suitable defaults that are
supplied in the software.
Select, for example, the "User" setting. Position the cursor on an
additional directory.
,
OK
Mark the directory of your choice and press the "OK" softkey.
Abort
A reset command by means of the "Abort" softkey for the selected
access level resets the data selection.
Additional information
The file tree displays files that the user may view on the basis of his or
her access rights.