7
01/2008 Services operating area
7.5 V.24 interface
7
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 7-389
Booting
After booting, the assigned files are displayed on the V.24 PG
softkeys and their settings for the interfaces are activated. If the
assigned files are not found, then the standard texts are re-displayed
(V.24 or PG). The corresponding interface is then assigned with the
last V.24 parameters.
To Next Page
Loading...
