0
Preface 01/2008
Layout of manual
0
© Siemens AG 2008 All rights reserved.
iv SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Hotline
If you have any questions, please contact the following hotline:
Europe and Africa time zone:
A&D Technical Support
Tel.: +49 (0) 180 / 5050 - 222
Fax: +49 (0) 180 / 5050 - 223
Internet: http://www.siemens.de/automation/support-request
E-mail: adsupport@siemens.com
Asia and Australia time zone
A&D Technical Support
Tel.: +86 1064 719 990
Fax: +86 1064 747 474
Internet: http://www.siemens.com/automation/support-request
E-mail: adsupport@siemens.com
America time zone
A&D Technical Support
Tel.: +1 423 262 2522
Fax: +1 423 262 2289
Internet: http://www.siemens.com/automation/support-request
E-mail: adsupport@siemens.com
Internet address
http://www.siemens.com/motioncontrol
Safety information
This Manual contains information which you should carefully observe
to ensure your own personal safety and the prevention of material
damage. The notices referring to your personal safety are highlighted
in the manual by a safety alert symbol, notices referring to property
damage only, have no safety alert symbol. Depending on the hazard
level, warnings are indicated in a descending order as follows:
Danger Indicates that death or severe personal injury will result if proper
precautions are not taken.
Warning This warning notice indicates that death or severe personal injury can
result if proper precautions are not taken.
To Next Page
Loading...
Need help?
General
