Stratasys Objet260 Connex - Using This Guide; For More Information

About This Guide
1–2 DOC-06810 Rev. A
Using This Guide
Thisuserguideprovidesinstructionsforinstalling,operatingand
maintainingObjet3Dprintingsystems.Itexplainshowtousefeatures,and
providespracticalexamplestoguideyouasyouusethesystem.
Thetextandfiguresinthisguidearebasedonthe3Dprinter,printer
softwareversion100.3.0andObjet
Studiosoftwareversion9.2.
Thisguideassumesthat—
• allthehardware,software,andnetworkcomponentsofyourObjet
systemareinstalled, configured,andoperatingcorrectly.
• theoperatorhasaworkingknowledgeoftheWindows
®
PCplatform.
For More Information
Visithttp://www.stratasys.com/formoredetailsaboutObjetprinter
technology,productsandconsumables,andforserviceandsupport
contacts.
ForotherdocumentsthatrelatetoObjet1000Plus3Dprintingsystems,and
forthisdocumentinotherlanguages,contactyourregionalStratasys
CustomerSupportoffice.
Ifyouhaveanyquestionsabouttheinformationpresented
inthis
document,orifyouhaveanycommentsorsuggestionsforfutureeditions,
pleasesendamessagetoc‐support@stratasys.com.