Stratasys Objet260 Connex - Terms Used in This Guide

DOC-06810 Rev. A 1–3
Objet1000 Plus User Guide
Terms Used in This Guide
buildtray InObjetStudio:Thesurfacedisplayedonthescreenthat
representstheactualbuildtrayintheprinter.
Intheprinter:Thesurfaceuponwhichmodelsareproduced.
cleaningfluid Cleanserforflushingmaterialfeedtubesandtheprinting
block,usedtocompletelyremoveModelandSupport
materialfromthesystem
beforeloadinganothertypeof
materialintheprinterandbeforelong‐termshutdown.The
cleaningfluidissuppliedinmaterialcontainers.
client/userworkstation TheworkstationonwhichObjetsoftwareisinstalled,used
forpreparingbuildtraysforproductiononObjetprinters.
(Thereisnolimittothenumberofclient
workstationsinthe
localnetwork.)
Connex™ Thetechnologyofprintingmodelsbyjettingmultiple
materialssimultaneouslyfromtheprintheads.This
technologyenablesObjet1000PlusprinterstoprintinDigital
Materialmode.
DigitalMaterial™ Combinationsofmodelmaterialsfabricatedintheprinter
fromthetwobasicmodelmaterialsinstalled.
DigitalMaterialMode Theprinter
modeusedtoprintajobusingtwodifferent
modelmaterials.(Thismodecanalsobeusedtoeliminatethe
needforperformingtheMaterialReplacementprocedure
whenprintingwithasinglemodelmaterial.)
JobManager™ ThepartofObjetStudiosoftwarethatmanagesproduction
jobsbeforetheyaresentto
theObjetprinter.
mixedpart Modelswhosepartsareprintedusingmorethanonemodel
material.
mixedtray Abuildtraycontainingobjects,eachofwhichisdesignedto
beprintedusingadifferentmodelmaterial.
Modelmaterial Materialusedforbuildingmodels.
ObjetStudio™ Thesoftwarewithwhichuserspreparejobsforproducing
models.
OBJDF(ObjetDigitalFormat) Theextensionofafilethatcontainsinformationaboutthe
geometryofanobjectandthematerialsrequiredtoprintit.
objdffilesarecreatedinObjetStudio.
OBJTF(ObjetTrayFormat) Theextensionofafilethatcontainsalloftheinformation
neededforamodel‐printing
jobonObjet3Dprinters.Anobjtf
fileisusedtosendaprintjobtoanObjet3Dprinter.
OBJZF(ObjetZFormat) Theextensionofacompressed“wrapper”filecontainingall
ofthefilesusedinanObjetStudiobuildtray.Usingobjzffiles,
aprintingjobcanbe
savedasasinglefile,forconvenient
storageandtransfer.