Stratasys Objet260 Connex - Ribbon Commands

Using Objet Studio
5–6 DOC-06810 Rev. A
Ribbon
Commands
ThefollowingtableliststheTraySettingsandModelSettingsribbon
commandgroups,andshowswhentheyareenabled,andwherethey
appear.
Group Purpose When
enabled
Tray
Settings
Ribbon
Model
Settings
Ribbon
Settingdisplay
colors.
Always.
Selecting
perspectiveand
zoomlevel.
Modelsareon
thebuildtray.
Choosetoselect
aplane,
elements,or
elementgroups
(assemblies).
Modelsareon
thebuildtray.
Changethe 
perspectiveof
theactivepane.
Modelsareon
thebuildtray.
Assigning
printing
material(s).
• Buildtray
isempty.
• Modelsare
not
selected.
Undoingor
redoingactions.
Afteran
actionor
object
selection.
Openingand
savingfiles.
Modelsare
notselected
.