Stratasys Objet260 Connex - Printer Interface Color Key

Operating & Maintaining the Objet1000 Plus 3D Printer
6–8 DOC-06810 Rev. A
Printer
Interface
Color Key
Thebackgroundcolorsintheprinterindicator fieldstellyouataglance
whetherornotthevalueoritemissuitableorreadyforprinting.
• Green—suitable/readyforprinting
Forexample,infigure 6‐5:
 HeadsLiquid—ThelevelofModelandSupportmaterialinthe
print‐blockreservoirisOK.
 Vacuum—Thevacuumlevelinthesystemiswithintheacceptable
range.
 Evacuation—TheflowofexhaustairfromtheprinterisOK.
• Red—notsuitableforprinting(orindicatesawarning)
Forexample,infigure 6‐5:
 Ambient—Theambienttemperatureoftheprintingchamberisnot
withintheacceptablerange.
• Blue—notready
Forexample,infigure 6‐5:
 UVlamps—TheUVlampsarenoton.
 Heads(°C)—Theheadshavenotreachedthetemperaturerequired
forprintingmodels(inprintingmode).
Thecolorofthematerialcontainersdisplayedintheprinterinterface
indicateswhichcontainersareactiveforthecurrent(ornext)printjob.
• Blue—activecontainers
• Gray—reservecontainers