Stratasys Objet260 Connex - Professional Mode Features

Using Objet Studio
5–64 DOC-06810 Rev. A
Professional Mode Features
SomeadvancedfeaturesofObjetStudioareonlyaccessibleinProfessional
Mode.
To see the current Objet Studio setting:
¾
OpentheToolsmenu.
Figure 5-92: Tools menu, showing Professional Mode selected
IfProfessionalModeisselected,advancedfeaturesaredisplayed.
To change the Professional Mode setting:
1. FromtheToolsmenu,selectProfessional Mode.
Thefollowingmessageisdisplayed,remindingyouthatthechange
willonlytakeeffectthenexttimeyouopenObjetStudio—eventhough
thecheckmarknexttotheProfessionalModeoptionappears
immediately.
Figure 5-93: Configuration-change message
2. Closeandre‐openObjetStudiotousetheProfessionalModefeatures.