DOC-06810 Rev. A 5–75
Objet1000 Plus User Guide
6. Inthepop‐upmessage,confirmthatyouwanttoworkinoff‐linemode
byclicking
No.
Figure 5-108: Off-line message
WhenObjetStudioisinoff‐linemode,youcanconfigureitforpreparing
printjobsfordifferentprinters.
To change the Objet Studio off-line configuration:
1. IntheSetPrinterdialogbox,selectaprintertype.
Figure 5-109: Off-line printer selection
2. ClickOK(not“Connect”).
To Next Page
Loading...
