Stratasys Objet260 Connex - Page 196

Operating & Maintaining the Objet1000 Plus 3D Printer
6–74 DOC-06810 Rev. A
Vacuum Teststhevacuumlevelintheprint
block.
•Faultyvacuumsensor.
•Vacuumleakage.
•Wrongparameters.
AmbientTemperature (Futureimplementation.)
EvacuationSensor Checkstheflowofexhaustairfromthe
printer.
• Blockedairventorduct.
• Faultyventilationfan.
• Faultyair‐flowsensor.
Test Name Description Possible Reason for Failure