GTS Technical Manual
9. April 2021 Edition: V1.00/2021 6-38
Copyright © 2020, Diversey
ST.08.16 error codes overview - 2100_4000_5000_3500µicro_V1.40.fm
512 Encoder signal No signal from encoder has been detected while driving.
Machine works with reduced speed.
Check encoder, wires and connections.
Machine drives on
reduced speed
E0512
600 Squeegee lifting motor no
load
No current for squeegee motor has been detected.
Check squeegee motor, wires and connections.
E600
602 Squeegee lifting motor short
circuit
Short circuit squeegee motor has been detected. Squee-
gee motor is turned OFF.
Check squeegee motor, wires and connections.
E602
603 Squeegee lifting motor time
out
No reaching of end position of squeegee motor after a
defined time has been detected. Squeegee motor is
turned OFF.
Check Squeegee motor, wires and connections.
E603
610 Offset motor no load No current for offset motor has been detected.
Check offset motor, wires and connections.
E0610
612 Offset motor short circuit Short circuit offset motor has been detected. Offset mo-
tor is turned OFF.
Check offset motor, wires and connections.
E0612
613 Offset motor time out No reaching of end position of offset motor after a de-
fined time has been detected. Offset motor is turned OFF.
Check offset motor, wires and connections.
E0613
700 Vacuum motor no load No current for vacuum motor has been detected.
Check vacuum motor, wires and connections.
-
701 Vacuum motor over current Over current has been detected during 30s.
Check vacuum motor, wires and connections.
Vacuum motor turns
OFF
E701
Error codes Function Control Machine status Display
informa-
tion
Table 4: Error codes overview
To Next Page
Loading...
Need help?
General