Fig.: Detailed Report
Display of sum total readings
To display the volume measured
at idle speed, an additional V
T
sum total counter can be
provided. This, in keeping with
previous sum total counters, is
operated as a resettable single-
day counter and not as a
resettable indefinite or 'endless'
counter. The reading appears
on the display screen under
menu item 2, 'Sum total
readings'. To avoid irritations,
the corresponding idle speed V
T
counter is only displayed while
the 'Idle speed measurement'
function is enabled.
Provided this is supported by EMIS, idle speed measurements can
also be transmitted as event reports to the EMIS. Transmission takes
place in FTL format. As a data record for transmission of the
dispensing data at idle speed, '11 Transfer' is used. To designate the
dispensing data at idle speed, order number '9998' is displayed in
conjunction with product code '00' and fault code '1 12 03' (1: fault
relating to counter, compensation and sensors, 12: counter, 03:
unauthorized opening of additional delivery path).
9.3.1.4.9
The OBC summary
A summary of orders transferred from the OBC can be obtained via
parameter 3.1.4.0.4. If this parameter is deactivated, OBC orders
To Next Page
Loading...
