Status information
Immediately after switching on, the current statuses of all sensor inputs
are detected and saved in the logbook.
Example:
SIStat: 01-------12---0 --- 0
SIIndx: 11-------22---5 --- 7
Sensor 1, 2: „Dome cover“ (1)
Sensor 10, 11: „API coupling“ (2)
Sensor 15: „Cabinet door left“ (5)
Sensor 20: „Handbrake“ (7)
It is possible to output a special event report via the print menu
(parameter 0.1.2) which contains only the sensor events.
9.13.2 Configuration of the device
9.13.2.1
Sensor interface
The sensor interface is configured via its DIP switches.
To Next Page
Loading...
