You can also select the hose by entering the preceding number.
With <Stop> you can quit the selection menu at any time.
6. Select a new product (if required)
The actual input line is marked by pointed brackets (>XX<).
Correct the input fields. Confirm all entries with <Enter>. This
takes you automatically to the next input field. The last input field is
followed by the first one again.
First step:
Specify the product which is identified by its product code.
(Parameters: product page and index).
If you do not know the product code, select the desired product
with <Enter>.
A 3-page selection list of all products then appears
automatically which you can open with <Enter>. (With <Stop>
you go back.)
Select the desired product with <Enter>.
The selection is now accepted into the discharge settings.
Second step:
Enter the required discharge quantity. The selected volume must
be larger or equal to the minimum discharge volume (cf. parameter
list: e.g. 200 L).
Now you enter price and customer ID in case these options are
activated.
Should you have made an input error, you can overwrite the
faulty value by a new entry, or you can delete the character to
the left of the cursor with the key <F2> ('Clear').
7. Start the discharge
If all input is correct, your start the discharge with the <Start>-key.
This also applies to packed product (additive).
To Next Page
Loading...
