"COPY" should not, for example, appear on the original receipt.
Correspondingly, the option 'K' is provided for the text field "COPY".
An example of the applications for the various attributes is described in
the following.
10.1.1
W & M Requirements
The definition of the delivery note is divided in two sections: the section
subject to W & M regulations and the other one not subject to W & M
regulations.
During calibration a minimum layout requirement is defined in parameter
3.1.3.4, enabling the changing of the delivery note after calibration. The
delivery note elements required in Germany are factory-set. Printing of
the required text elements is mandatory on any delivery note and any
invoice (W & M requirement).
After any change made in the delivery note definition the MultiFlow
checks whether these mandatory text elements are available. In case a
text element is found missing, an error message appears on the screen.
Only when all required text elements are available in the delivery note
definition, the delivery note can be changed and adapted. This procedure
ensures that no parameter required by W & M regulations is omitted in
the delivery note definition. Additional amendments to the delivery
note definition can thus be made without breaking the W & M seal.
10.1.2
Entry Dialogue
The form entry dialogue
enables the user to change,
delete and insert into the list of
elements which describe a
form.
To Next Page
Loading...
