TechnipFMC Sening MultiFlow - Page 196

MN F09 002 US  DOK-383E  Issue/Rev. 3.62
(02/13)
MultiFlow  Form Description
200
Sening® is a registered trademark of FMC Technologies
Invoice
Meter no.:
Receipt no.:
Delivery date:
Start of discharge:
End of discharge:
Customer ID.:
PI-ME 97
001275
01.12.97
10:45:30
10.48:55
000000
* Heating oil
*Amount at
*
15
Cel
*
228 L
*w. VAT: 87.65£ /100L = 199.84 £ *
Additive (0.5L) 1 pc.
w. VAT: 23.45£ / pc. = 23.45 £
-----------------------
Signed
You've been served
by: C. Anyone
10.1.2.3 Example of a Receipt
The example of a receipt illustrated below shows how the receipt
definition must be carried out.
Total net
194.16 £
VAT 15.00 % 194.16
29,13 £
Total gross
223.29 £
10.1.3 Summary of Text Modules
 In order to obtain an overview of which elements (modules) are available
for the definition of the receipt, a summary can be printed with the
function "Form elements" (menu 3.4.6). The attributes supported by the
connected printer are also shown in the printout.
The example shown was produced by a DR-295 printer. From the table it
can also be seen that not all the attributes are supported by the DR-295.
Example of a text module print-out: