TechnipFMC Sening MultiFlow - Page 199

MN F09 002 US  DOK-383E  Issue/Rev. 3.62
(02/13)
MultiFlow  Form Description
Sening
®
is a registered trademark of FMC Technologies
203
ID
Output
Name
Remarks
10
End of discharge: ss:mm(:ss)
Discharge end time
11
*
Product name
Volume at nn Cel XXXXXXX L
w. VAT: 12.34£ /100L = YYYYY.YY £
Product block #1
Contains product name and code,
discharge volume and type, gross
and net prices only on invoice.
Figures about compensation may
Product name
vary!
At discharge temperature XXXXXXX L
w. VAT: 12.34£ /100L = YYYYY.YY £
After enabling the option „W“, the
compensated product weight is
Product name XXXXXXX
also shown in the product block.
Pc.
w. VAT: 12.34£ /100pc = YYYYY.YY £
12
*
Product name
Volume at nn Cel XXXXXXX L
Product block #2
Printing of volumes VT and V15
is subject to setting the product
parameter 3.5.nn.7.1. See
At discharge temperature XXXXXXX L
w. VAT: 12.34£ /100L = YYYYY.YY £
chapter 9.10 "Product Registers
(35nn..)" / page 166.
After enabling the option „W“, the
compensated product weight is
also shown in the product block.
13
(see ID # 11)
Product block #3
Price line also on delivery note
*
After enabling the option „W“, the
compensated product weight is
also shown in the product block.
14
Total net
12345.67 £
Sum block #1
Contains net sum, taxes, gross
sum
VAT 12.34% 1234.56 12345.67 £
Total gross 12345.67 £
15
Total net
12345.67 £
Sum block #2
Same as sum block #1, however
stating both currencies.
VAT 12.34% 1234.56 12345.67 £
Total gross 12345.67 £
At exchange rate 1.23456
Total gross xxxxxxx EUR
16
Total net 12345.67 £
VAT 12.34% 1234.56 12345.67 £
Sum block #3
Same as sum block #2, but
without stating the exchange rate.
Total gross 12345.67 £
Total gross xxxxxxx EUR
17
Free
Not defined.
18
Driver's name: xxxxxxxxxxxxxxxxxxxx
Driver's name
Driver's name from driver table.
19
Meter before start: 0 L
Meter reading
Meter reading before the
discharge (appears on zero
receipt).
20
RECEIPT TITLE
Receipt title
Combines the fields 21-24 and 28
- 29; differentiated positioning is
not possible.
21
INVOICE
Text: Invoice
Predefined text element (only
appears on invoices).
22
DELIVERY NOTE
Text: Delivery note
Predefined text element (only
appears on delivery notes).
23
ZERO RECEIPT
Text: Zero receipt
Predefined text element (only
appears on zero receipts).
24
W & M RECEIPT
Text: Calibration
Predefined text element (only
appears on calibration receipts).
25
*
COPY
Text: Copy
Predefined text element (only
appears on copies).