EasyManua.ls Logo

TechnipFMC Sening MultiFlow - Page 200

TechnipFMC Sening MultiFlow
356 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MN F09 002 US  DOK-383E  Issue/Rev. 3.62
(02/13)
MultiFlow  Form Description
204
Sening® is a registered trademark of FMC Technologies
ID
Output
Name
Remarks
26
Data from calibrated parts of the
device are enclosed by *.
Cal. Remark
Standard text for printouts made
on forms not bearing the
compulsory remark.
27
Seal broken!
No responsibility accepted for any
values measured.
Seal Alarm
Standard text used whenever the
seal is broken.
28
**
PRODUCT TRANSFER
Text: Prod. Transf.
Predefined text element (only
appears on transfer forms).
29
**
SELF LOADING
Text: Self Loading
Predefined text element (only
appears on self loading forms).
30
*
(see ID # 11)
Product block 4
(see ID # 11);
the positions of “Discharge type”
and “Product name”
are exchanged.
After enabling the option „W“, the
compensated product weight is
also shown in the product block.
31
**
Only for internal use,
Not Authorised for Trade Use!
Transfer Remark
Predefined text element (only
appears on self loading and
product transfer forms).
32
Selected Hose : XXXXXXXXXXXXXXXX
Hose Path
When the electronic hose
selection is being used, the hose
path used is printed out; if more
than one discharge per receipt is
allowed, then a table is printed
out with the hose paths for all
discharges.
33
Average Flow: XXXX L/min
Average Flow Rate
Average flow rate during the
discharge (i.e. downtime periods /
discharge interruptions are not
taken into account); if more than
one discharge per receipt is
allowed, then a table is printed
out with the average flow rates for
all discharges.
35
Compartment no..:
Compartment number
When automatic query of the
compartment number is activated,
the compartment number
specified in the discharge preset
is printed out.
36
Discharge preset:
Discharge preset
The discharge volume specified
in the discharge preset is printed
out.
37
Order no.:
Order number
When the order number query is
activated, the order number
specified in the discharge preset
is printed out.
38
Seal count:
Seal count
39
Delivery CO2 emission data:
Emission : XXXX,XXX kgCO2
Emissions costs : YY,YY EUR
Emission factor : X,XXXX kgCO2/kWh
Caloric value : XXXX,XX kWh
Claims due to self-sufficiency according
to par.6(2)&8(2)CO2KostAufG possible
CO2KostAufG.
Printout of the CO2 emission
data
50
Discharge line start
Identifies the beginning of a
record line
51
Discharge line end
Identifies the end of a record line
52
Free
53
Free
54
Product name

Table of Contents

Related product manuals