MN F09 002 US DOK-383E Issue/Rev. 3.65 (02/24)
MultiFlow Address and contact details
Sening® is a registered trademark of FMC Technologies
Determination of the compensation algorithm in
dependence of the product group:
1 Packed Goods
2 Crude Oil (API-Table 54A)
3 Refined Oil (API-Table 54B)
4 Special Product (API Table 54X)
for liquid gas & bitumen
5 Lube Oil (API-Table 54D)
6 Direct-Linear (Mixed Products)
for e.g. E5, E10 …
Product Registers (35nn..)
The placeholder 'nn' in the product register corresponds to the product
register number where 'nn' varies from 11 to 30. The product register
number is extended by the parameter number to give unambiguous
identification of a parameter in a product register.
Example: Mean density on the first product page in the third product
register. The placeholder nn is in this case substituted by
page 1 and register 3 (nn = 13).
Product category
(1: Liquid product, 2: Additive, 3: Packed products)
IMPORTANT: Liquid products can only be activated
by breaking the W & M seal!
This parameter activates the additive dispensing for
the selected product register.
Reference to the register number of the additive to be
used.
IMPORTANT: The parameter is only active when
parameter 3.5.n.n.5.1 is set to 1 (yes)
and 3.3.3.3 is not set to zero
(inoperable).
Mixing ratio for the additive.
IMPORTANT: The parameter is only active for
products of type 2 (additive).
Standard price for the product.
6
Printout of Section 12 ElexV see Appendix