instance, the download logbook must be reset via the "Reset" (menu
4.6.4) item. To this end, the electronic seal must be broken beforehand.
The update report is automatically printed before the download logbook is
reset. If this is not possible, then the reset cannot be carried out.
The download is approved for the MultiFlow concerned via the "Program
update" menu item (menu 4.6.1). It is necessary to select the "Activated"
status for this purpose. The download is protected by the master
password. The user must enter the correct password and his/her user ID
before downloading can start. This is then saved together with the actual
date and time in the logbook for the purpose of tracking the executed
downloads. The download can be started on completion of all the
required entries. No software can be transferred to MultiFlow without this
download approval.
The "Remain. attempts" menu item (menu 4.6.2) gives a quick indication
of remaining available download attempts.
A printout of the current update
report can be generated using
the "Update report" menu item
(menu 4.6.3). This report
contains general information
and also the number of
remaining available downloads
attempts. The "Update
progress" section contains a list
of all software downloads
started or executed so far along
with date, time, status (‘ -` =
incomplete download, `+` =
complete download), checksum
and user ID.
------------------------------------------
Remain. attempts : 25
------------------------------------------
Update progress :
06.12.06/12:54 - 00000000 User ID
06.12.06/12:56 + EC2F31E2 User ID
06.12.06/13:08 + EC2F31E2 User ID
06.12.06/13:30 – 00000000 User ID
06.12.06/13:36 + EC2F31E2 User ID
------------------------------------------
To Next Page
Loading...
