TechnipFMC Sening MultiFlow - Page 64

70
Sening® is a registered trademark of FMC Technologies
MN F09 002 US  DOK-383E  Issue/Rev. 3.65 (02/24)
MultiFlow  Initial Operation
 With the button <F3> the version number of the sensor interface will be
queried.
The diagnosis function can be used only when the connection to the
sensor interface is active.
There is a short delay between the change in status and the display
updating due to the internal evaluation logic.
The states transmitted from the sensor interface are shown
independent of the NC / NO logic configured in the Multiflow.